bauma '04.2019

Liebherr LTM 1650-8.1 '2020–pr.

Image specifications:

  • Resolution: 1920×1282 @ 300×300 DPI 16.26×10.85cm
  • Filesize: 5.13 MB
  • Added by: d_trucker , 5 years ago
  • Date taken: 18.10.2018
  • Picture status: Accepted

All images have their owners.

If you think that the users of the site made a mistake by posting this image in this section, it would be nice if you wrote about it in the comments and pointed out the error.

Discuss anything and just talk about cars and not only can you on the forum.

Comments

5 years ago
d_trucker

The LTM 1650-8.1 is designed to deliver maximum performance. The new Liebherr mobile crane has large shoes to fill as it is the successor to the best-selling large crane of all time – almost 600 units of the LTM 1500-8.1 have been delivered to date. The successful concept of the two telescopic boom versions is continued – the LTM 1650-8.1 is available with 177 ft. and 263 ft. (54 and 80 m) telescopic booms.

In designing the new 8-axle crane, Liebherr focused on maximum load capacities. The LTM 1650-8.1 travels with an axle load of 26,400 lbs. (12 t) complete with its 177 ft. (54 m) telescopic boom and the front supports. To minimize set-up time, however, the rear supports are installed as complete support box in a single hoist and connected using quick-release couplings.

https://www.oemoffhighway.com/ifpe-conexpo/press-release/21112941/liebherr-usa-liebherr-showcasing-over-30-machines-celebrate-50th-anniversary-at-conexpo-2020

https://northwestcraneservice.com/equipment/all-terrain-mobile-crane/liebherr-ltm-1650-8-1/

2 years ago
Wheels&Tracks

Munich (Germany), 8 April 2019 – Liebherr unveils a new 8-axle mobile crane at the Bauma. The new Liebherr mobile crane has large shoes to fill as it is the successor to the best-selling large crane of all time – with almost 600 units of the LTM 1500-8.1 have been delivered to date. The successful concept of the two telescopic boom versions is continued – the LTM 1650-8.1 is available with 54 and 80 metre telescopic booms.

In designing its new 8-axle crane, Liebherr focused on maximum load capacities. The LTM 1650-8.1 travels with an axle load of 12 tonnes complete with its 54 metre telescopic boom and the front supports. To minimise the set-up time, however, the rear supports are installed as complete support box in a single hoist and connected using quick-release couplings.

An eight-cylinder Liebherr diesel engine in the undercarriage which develops 505 kW / 687 bhp and torque of 3,160 Nm provides the LTM 1650-8.1 with all the power it needs. The engine satisfies the new stage V emissions directive and can also be built to comply with the regulations which apply in countries outside of Europe, for example Tier 4f for the USA or stage III for low regulated countries.

The power is transferred to the crane axles using the innovative 12-speed ZF TraXon Torque gearbox. A torque converter enhances manoeuvring and starting. ECOdrive is a new feature. Meanwhile, Hillstart Aid makes starting on gradients easier. The intarder, a zero wear hydrodynamic brake integrated in the gearbox, acts as a retarder. In addition a Telma eddy current brake is standard.

Liebherr-Werk Ehingen GmbH press information

To be able to post a comment, you must create an account or sign in using social networks account

WheelsAge.org '2005–pr.